Search Log in / register
Sample Cart
FDZ CONNECTOR 2.54mm Pitch ZIF Connector For FPC and membrane switch leads
  • Features
  • Specification
  • Downloads
  • Samples

The FDZ connector, a Zero insertion force (ZIF) connector, was developed to connect FPC and membrane switch leads. This combination of features allows greater freedom in internal wiring designs. No force is required to insert the leads. Once inserted, the leads are securely held and locked by moving the slide. The contact is double-sided to ensure greater reliability.





  •  Double-sided Contact

The contact is double-sided, thus providing redundant and highly reliable contact with FPC and membrane switch leads. this allows greater freedom in specifying the membrane switch lead conducting surfaces for use in keyboards.

  • Zero insertion force and locking mechanism 

A ZIF mechanism increases wear resistance and extends the connector's mating life. The leads are securely connected by simply moving the slide. This greatly reduces the damage to the conducting surfaces of the leads. This mechanism is therefore ideal for silver-paste carbon-printed pattern leads which are susceptible to wear. The slide also has a hook to ensure secure contact and a tight hold.

  • Temporary board retention feature 

The contact solder tail has a board retention feature that allows the connector to be temporarily held on the PC board while it is being soldered. As a result, the connector can be located accurately in the finished product.

  • Boss for polarity identification

A boss (projection) on the bottom of the housing prevents improper insertion in the printed circuit board and provides greater mounting stability.

  • Flux is not a problem

The bottom of the connector housing is raised 2.0mm (.079") from the surface of the printed circuit board. This prevents flux being trapped under the connector. In addition, the central section of the contact has a special form that prevents flux from rising into the connector due to the capillary action.

Caution: Flux level should be lower than the printed circuit board.

  • Standards

UL Recognized E60389

CSA Certified LR20812

  • RoHS Compliant

01 - Connection Type: Printed Circuit Board Connectors
02 - Product Type: FFC/FPC Connectors
03 - Pitch / Style: 2.54mm
04 - Current rating: 1.0A AC,DC
05 - Voltage rating: 250V AC,DC
06 - Temperature range: -40 to +85 Degrees Celsius
07 - Available number of circuits: 5 to 19
11 - Feature: ZIF Type
13 - PCB Mount Style: Through-hole Technology (THT)

Full Technical Drawings

If you require full technical drawings or any other in-depth information about this product series, please contact us using the link below.

Contact Us

Additional Information

This product series has some additional information related to it that you can download from the list below.

1) Catalogue Page 2) Handling Manual