Series:

XM HIGH BOX CONNECTOR

Description: 2.5mm Pitch Disconnectable Crimp Style
Enlarge Photo

The header is tall and fully shrouded so as to prevent the resin used to coat the PCB coming into contact with the mating pins. Designed for use specially with resin coated ("potted") PCBs.

Housing is matable with XM receptacle for wire-to-wire connection.

Inner-lock construction. Housing has the inner-lock mechanism, which improves the retention force. It is protected from external force when engaged with the header.

Secondary retainers provide added protection against non-insertion or disconnection.

 

  • Interchangeability

The housing is matable with the XM receptacle housing for wire-to-wire connection.

  • Inner-housing lock

This inner-housing lock secures the plug to the receptacle and prevents accidental disconnection. The lock is protected and is not affected by external forces that might result from the routing of wires.

  • Secondary retainers

The secondary retainers enhance safety in case of partial insertion or accidental release of the contact. Even if a contact is inserted incompletely, the retainer guides the contact to the proper position and securely locks it in place.

  • Header for 2.5mm (.098") pitch XM connector for use specifically with resin coated ("potted") PC boards

This header is tall and fully shrouded so as to prevent the resin used to coat the PC board from coming into contact with the mating pins.

  • RoHS Compliant